News

How to Replace Kitchen Faucet

HOW TO REPLACE KITCHEN FAUCET

If you are looking for ways to replace your kitchen faucet, then you should read this article. Here is the step by step guide to help you how to change your faucet.

 You can replace your facet to update the look of your kitchen. Essential instructions and the right equipment is all you require to replace your faucet. 

Step by Step Guide to Replace the Faucet 

Step 1: Determine What Type of Faucet You Have

You should look at the top of the kitchen sink and count the number of components that make the faucet.

It is significant as it tells you how plenty of holes are available on the kitchen sink for installing the new faucet, and as it tells you the location of the components that you will require to take out when it is time to climb under the kitchen sink.

Step 2: Verify the Kitchen Sink Hole Count

After climbing under the kitchen sink and see where the sprayer or faucet is fixed. While under the sink, try to search which equipment will be useful to utilize.

Step 3: Shut the Water Off

Rotate the hot or cold-water knobs clockwise to turn off the water.

Step 4: Uninstall the Faucet Component

Turn the knobs counterclockwise until they come entirely off.

Step 5: Eliminate the Retaining Bracket

Pry the retaining bracket down until it is entirely off.

Step 6: Eliminate the Sprayer Base

Turn the plastic knob that is grabbing the sprayer base counterclockwise until it is entirely off.

Step 7: Take the Hose Out of the Sink

Do it and rest it on a bowl under the sink. Resting the hose will permit trapped water in your hose to drain into a container and don’t make a puddle in your workplace.

Step 8: Set the New Faucet

Offer the new faucet lines via one of the sinkholes, and you should leave a hole for the sprayer on one of the sides.

Step 9: Mount the Faucet

Search the mounting hardware given in the kit and utilize it to keep the faucet safe from under your sink.

Step 10: Attach the Supply Lines

Fix the supply lines to your valves. Avoid turning on the water valves yet! Observe no requirement for an anti-leaking paste or tape as the supply lines contain a built-in gasket.

Step 11: Attach the Sprayer Mount to the Sink

Climb under your sink and fix the retaining nut under the sprayer mount.

Step 12: Set the Sprayer Head

Feed your sprayer supply line via your sink mount.

Step 13: Attach the Sprayer to Your Faucet

Lead under your sink and lineup the end of the supply line to the instant connector.

Step 14: Prep Your Faucet to be drive 

Allow your aerator counterclockwise until it comes out, and then unscrew the sprayer head.

Leave a Reply